Siemens scalance WLC711 Reference Manual page 239

max-video-assoc 0-100
Parameters
0-100
Examples
The following example sets the maximum video bandwidth for new streams to 40% of total bandwidth:
WLC.siemens.com
max-video-reassoc
Use the
max-video-reassoc
when a client with an active video stream roams to a new AP and requests admission for the video
stream.
After you run the
max-video-reassoc
max-video-reassoc 0-100
Parameters
0-100
Examples
The following example sets the maximum video bandwidth for roaming streams to 60% of total
bandwidth:
WLC.siemens.com
max-voice-assoc
Use the
max_voice_assoc
an already associated client requests admission for a new voice stream.
After you run the
max-voice-assoc
max-voice-assoc 0-100
Parameters
0-100
SCALANCE WLC711 CLI Reference Guide
Specifies the maximum allowable bandwidth as a percentage of total bandwidth.
:vnsmode:adminctr# max-video-assoc 40
command to set the maximum allowed overall bandwidth on the new AP
command, run the
Specifies the maximum allowable bandwidth as a percentage of total bandwidth.
:vnsmode:adminctr# max-video-reassoc 60
command to set the maximum allowed overall bandwidth on an AP when
command, run the
Specifies the maximum allowable bandwidth as a percentage of total bandwidth.
VNS Commands (vnsmode)
command to implement the changes.
apply
command to implement the changes.
apply
max-video-reassoc
239