Siemens scalance WLC711 Reference Manual page 171

no primary server_name
Parameters
server_name
Examples
The following example sets the primary authentication server:
WLC.siemens.com
authset
Use the command to set authentication server information. The
authset
available from the login:auth context.
authset server_name port retry_value time_out nas_ip nas_string PAP | CHAP | MS-
CHAP | MS-CHAP2
Parameters
server_name
port
retry_value
time_out
NAS_IP
nas_string
PAP | CHAP | MS-CHAP |
MS-CHAP2
Examples
The following example specifies the authentication server information:
WLC.siemens.com
move
Use the command to change the order of the RADIUS server in the list of RADIUS servers. The
move
command is available from the login:auth context.
move
move #1 { + | - } #2
SCALANCE WLC711 CLI Reference Guide
Specifies the name of the server
:login:auth# primary FreeRadius70
Specifies a valid RADIUS server name
Specifies the RADIUS server port
Specifies the number of times to attempt to access the RADIUS server
Specifies the time in seconds to wait for a response from the RADIUS server before
trying again
Specifies the NAS IP address
Specifies the Network Access Server (NAS) Identifier
Specifies the Authentication Protocol
:login:auth# authset Radius 1812 3 5 192.168.4.112 NAS MS-CHAP
login Commands
authset
command is
authset
171