Siemens scalance WLC711 Reference Manual page 289

Usage
By default, HTTPS support is disabled.
Example
The following example enables HTTPS support on the WLAN service:
WLC.siemens.com
WLC.siemens.com
custom
Use the command, within context wlan:<WLAN-service-name>:auth:captiveportal, to configure
custom
communications options for custom captive portal settings.
After you run the
custom
custom local | web
Parameters
local
web
Usage
If customized captive portal content was previously downloaded to the controller using the
command, custom can only be successfully set to local. The internal or splash authentication
custom
mode must be set for this command to be available. For more information, see
Example
The following example sets the captive portal communications options to web:
WLC.siemens.com
WLC.siemens.com
extcpip
Use the command, within context wlan:<WLAN-service-name>:auth:captiveportal, to specify
extcpip
the IP address and the server access port on the Wireless Appliance for communication with an
external authentication server.
After you run the
extcpip
extcpip A.B.C.D:port
Parameters
SCALANCE WLC711 CLI Reference Guide
:wlans:external_wlan:auth:captiveportal# cp-ssl enable
:wlans:external_wlan:auth:captiveportal# apply
command, run the
apply
Sets captive portal communications options to local
Sets captive portal communications options to web
:wlans:new-wlans:auth:captiveportal# custom web
:wlans:new-wlans:auth:captiveportal# apply
command, run the
apply
command to implement the changes.
command to implement the changes.
wlans Commands
custom
copy-
mode on page 302.
289