Slpreg; Agent - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Use the
mheartbeat
response between the Mobility Agent and the Mobility Manager.
mheartbeat value
Parameters
value
Examples
The following example sets the outgoing heartbeats to occur at 5 second intervals:
WLC.siemens.com
slpreg
Use the
command to enable SLP registration. Use the no form of the command to disable it.
slpreg
slpreg
no slpreg
Parameters
None
Examples
The following example enables SLP registration:
WLC.siemens.com
agent
Use the
command to add, remove, or approve an agent on the network by its IP address when
agent
the current controller serves as a mobility manager.
The role of the Wireless Appliance must be set to Manager before this option becomes available. For
more information, see
agent (add|remove|approve|backupMgr) IP Address
Parameters
add
remove
approve
SCALANCE WLC711 CLI Reference Guide
command to set the time interval (in seconds) for the connection establishment
Specifies the interval time in seconds between outgoing heartbeats
:mobility# mheartbeat 5
:mobility# splreg
mrole
on page 199.
Adds an agent to the network
Removes an agent from the network
Approves an agent on the network
mobility Commands
slpreg
200
Advertisement
Table of Contents
