Siemens scalance WLC711 Reference Manual page 196
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Example
The following example enables prevention of any station from using a rogue AP for the scp_name scan
profile in-service:
WLC.siemens.com
WLC.siemens.com
security-scan
Use the
security-scan
is accessible from the mitigator:scprof:<named scan profile> context and the mitigator:gsprof:<named
guardian scan profile> context of the CLI.
After you run the
security-scan
security-scan (enable | disable)
Parameters
enable
disable
Example
The following example enables security scans:
WLC.siemens.com
WLC.siemens.com
spoofed-ap
Use the
spoofed-ap
command is accessible from the mitigator:scprof:<named scan profile> context and the
spoofed-ap
mitigator:gsprof:<named guardian scan profile> context of the CLI.
After you run the
spoofed-ap
spoofed-ap (enable | disable)
Parameters
enable
disable
SCALANCE WLC711 CLI Reference Guide
:mitigator:scprof:in-service# rogue-prevent enable
:mitigator:scprof:in-service#
command to enable or disable security scans. The
command, run the
Enables security scans for rogue APs.
Disables security scans for rogue APs.
:mitigator:scprof:scp_name# security-scan enable
:mitigator:scprof:scp_name# apply
command to enable or disable prevention of any station using a spoofed AP. The
command, run the
Enables prevention of access to a spoofed AP.
Disables prevention of access to spoofed APs.
command to implement the change.
apply
command to implement the change.
apply
Radar Commands
security-scan
command
security-scan
196
Advertisement
Table of Contents
