Rcommunity; Rwcommunity; Severity - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Type one of the following:
•
C – Cancels the SNMP configuration and returns to the AP context.
•
P – Enables SNMP publishing and maintains LLDP enabled
•
O – Enables SNMP and disables LLDP
rcommunity
Use the
rcommunity
rcommunity string
Parameters
string
The following example sets the name of the read-only community:
WLC.siemens.com
rwcommunity
Use the
rwcommunity
allows the modification of stored data on the administrative system.
rwcommunity string
Parameters
string
Examples
The following example sets the name of the read-write community:
WLC.siemens.com
severity
Use the
severity
severity level.
severity (1|2|3|4|5)
Parameters
1
2
SCALANCE WLC711 CLI Reference Guide
command to set the name of the read-only community.
Specifies the name used for the read-only community
:snmp# rcommunity public
command to specify the name of the read-write community. This community
Specifies the name used for the read-write community
:snmp# rwcommunity private
command to configure the Wireless Appliance to send SNMP traps of the specified
Forwards the SNMP trap with the Critical severity level
Forwards the SNMP trap with the Major severity level
snmp Commands
rcommunity
216
Advertisement
Table of Contents
