Siemens scalance WLC711 Reference Manual page 251
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
The global setting of Radius Accounting must be enabled prior to using this command. Defer
accounting start is disabled by default.
defer-acct-start (enable | disable)
Parameters
enable
disable
Examples
The following example enables defer accounting start:
WLC.siemens.com
delay-client-msg
Use the
delay-client-msg
if a topology change occurs during athentication. The
the vnsmode:radius context of the CLI.
delay-client-msg 1-60
Parameters
1-60
Examples
The following example sets the delay to 40 seconds:
WLC.siemens.com
delete
Use the
command to delete a RADIUS server configuration. The
delete
from the vnsmode:radius context of the CLI.
delete RADIUS_server
Parameters
RADIUS_server
SCALANCE WLC711 CLI Reference Guide
Enables the defer accounting start feature.
Disables the defer accounting start feature.
:vnsmode:radius# defer-acct-start enable
command to set the delay, in seconds, for the client message that displays
The time, in seconds, that the client message displays if a topology change occurs
during athentication.
:vnsmode:radius# delay-client-msg 40
Specifies the name of the RADIUS server to delete
VNS Commands (vnsmode)
command is accessible from
delay-client-msg
delete
delay-client-msg
command is accessible
251
Advertisement
Table of Contents
