Siemens scalance WLC711 Reference Manual page 316

interwlan-roaming
Use this command to enable or disable inter-WLAN roaming on this WLAN service. The
command is accessible from the wlan:<WLAN-service-name> context of the CLI.
roaming
interwlan-roaming enable|disable
Parameters
enable
disable
Example
This example disables inter-WLAN roaming on the WLAN service named test:
WLC.siemens.com
name
Use the command to modify the name of this WLAN service. The
name
from the wlan:<WLAN-service-name> context of the CLI when the WLAN service type is STD.
After you run the
name
name WLAN-service-name
Parameters
WLAN-service-name
Example
The following example changes the name of the test WLAN serve to "not-test":
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Name: not-test
netflow
Use the command to enable or disable NetFlow on the named WLAN. The
netflow
command is accessible from the wlans:<named-wlan> context of the CLI.
netflow (enable | disable)
Parameters
enable | disable
SCALANCE WLC711 CLI Reference Guide
Enables the inter-WLAN roaming feature for this WLAN service. This is the default
setting.
Disables the inter-WLAN roaming feature.
:test# interwlan-roaming disable
command, run the
apply
Specifies the name to use for this WLAN service
:wlans:test# name not-test
:wlans:test# apply
:wlans:test# show name
Enables or disables NetFlow on the named WLAN.
name
command to implement the name change.
wlans Commands
interwlan-roaming
interwlan-
command is accessible
netflow
316