Siemens scalance WLC711 Reference Manual page 261
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Examples
The following example sets the RADIUS interim accounting interval to 10 seconds for the RADIUS
server named RAD1:
WLC.siemens.com
ip
Use the
command to configure the RADIUS server's IP address or FQDN (Fully Qualified Domain
ip
Name). The
command is accessible from the vnsmode:radius:<named_RADIUS_server> context of
ip
the CLI.
ip A.B.C.D
Parameters
A.B.C.D
Examples
The following example sets the IP address of the IAS RADIUS server to 222.224.1.23:
WLC.siemens.com
name
Use the
command to modify the RADIUS server name. The
name
vnsmode:radius:<named_RADIUS_server> context of the CLI.
name new_RADIUS_server_name
Parameters
new_RADIUS_server_name
Examples
The following example renames the RADIUS server RAD1 to RAD2:
WLC.siemens.com
WLC.siemens.com
Name: RAD2
protocol
Use the
protocol
command is accessible from the vnsmode:radius: <named_RADIUS_server> context of the CLI.
protocol [CHAP|MS-CHAP|MS-CHAP2|PAP]
SCALANCE WLC711 CLI Reference Guide
:vnsmode:radius:RAD1# interim 10
Specifies the IP address of the RADIUS server in dotted decimal notation.
:vnsmode:radius:RAD1# ip 222.224.1.23
Specifies the name of the RADIUS server.
:vnsmode:radius:RAD1# name RAD2
:vnsmode:radius:RAD1# show name
command to set the security protocol used with the RADIUS server. The
VNS Commands (vnsmode)
command is accessible from the
name
ip
protocol
261
Advertisement
Table of Contents
