Siemens scalance WLC711 Reference Manual page 179

After you run the
dtime
dtime 200-5000
Parameters
200-5000
Example
The following example sets the channel dwell time of scan group South Block to 200 milliseconds:
WLC.siemens.com
WLC.siemens.com
interval
Use the
interval
120 minutes.
After you run the
interval
interval period
Parameters
period
Example
The following example modifies the scan time interval to 30 minutes:
WLC.siemens.com
WLC.siemens.com
radio
Use the command to modify the radio mode to be used for scanning.
radio
After you run the
radio
radio radio1|radio2|both
Parameters
radio1
radio2
both
SCALANCE WLC711 CLI Reference Guide
command, run the
apply
Specifies the dwell time of the scan group in milliseconds.
:mitigator:scgroup:South Block# dtime 200
:mitigator:scgroup:South Block# apply
command to modify the scan time interval in minutes. Valid values are from 10 to
command, run the
Specifies the scan time interval period in minutes
:mitigator:scgroup:South Block# interval 30
:mitigator:scgroup:South Block# apply
command, run the
apply
Specifies radio 1 to be used
Specifies radio 2 to be used
Specifies both radio 1 and radio 2
command to implement the change.
command to implement the change.
apply
command to implement the change.
Radar Commands
interval
179