Show; Named-Topology - Siemens scalance WLC711 Reference Manual

This example disables multicast support for the topology context:
WLC.siemens.com

show

Use the command to display topology configuration information.
show
show [topology name]
Parameters
topology name
Examples
Example code is not currently available.
WLC.siemens.com
Name
L3:IP,GW,DHCP
Admin
192.168.3.13,192.168.3.7,N/A fd66:2280:2668::0013,fd66:228:2668:0000:862b:
2bff:fe60:2a8a 64;fe80:0000:0000:0000:862b:2bff:fe60:2a8a 64
Bridged at AP
Port1
Port2
Port3
Port4
Seg1_Routed
Seg2_Routed
ACTT_Seg1_Routed routed
ACTT_Seg2_Routed routed
route1
TopoFor313
Topology global info:
Internal VLAN ID: 1
Multicast support: disabled
<named-topology>
The
<named-topology>
moves you into the topology:<named-topology> context, which contains commands to configure the
settings of the specified individual topology.
The following commands are available in the topology:<named-topology> context.
•
3rd-party on page 344
•
l2 on page 344 — See
•
l3 on page 349 — See
•
l3presence on page 370
•
mode on page 370
SCALANCE WLC711 CLI Reference Guide
:topology# multicast-support none
Displays information about the specified topology.
:topology# show
Mode L2:VlanId,tagged,port
L3:IPv6,Auto-Generated
admin N/A,N/A,Admin
untagged b@ap 123,enable,N/A
physical 103,disable,Port1
physical 2,disable,Port2
physical U,disable,Port3
physical U,disable,Port4
routed N/A,N/A,N/A
routed N/A,N/A,N/A
N/A,N/A,N/A
N/A,N/A,N/A
routed N/A,N/A,N/A
b@ap 553,enable,N/A
command, where <named-topology> refers to the name of a given topology,
l2 on page 344 for commands in the topology:<named-topology>:l2 context.
l3 on page 349 for commands in the topology:<named-topology>:l3 context.
topology Commands
10.13.0.1,10.13.0.9,local
10.13.1.1,none,none
10.0.2.1,none,none
10.0.3.1,none,none
172.16.209.1,none,local
172.16.210.1,none,local
10.13.16.1,none,local
10.13.32.1,none,local
5.5.5.5,none,local
show
343