Siemens scalance WLC711 Reference Manual page 395

assign-ap
Use the assign
-ap
The command is accessible from the site:<named-site> context.
assign-ap
assign-ap (add|delete) ap serial
Parameters
add | delete
ap serial
Usage
You specify the AP by its serial number. If you enter the command without an AP serial number, the CLI
displays a list of available APs by their serial numbers and, if named to the system by an ap:<serial>
context command, the AP name.
name
Examples
The following example shows a listing of available APs:
WLC.siemens.com
The available APs:
0500009353050067(EWC-3640)
050000829F737045(050000829F737045)
0409920201204015(C25-AP3710)
0500009203050048(C25-AP3705-50048)
0500009203050013(C25-AP3705)
10490066235A0000(AP-3660-Ext)
0509920201203250(EWC-AP-3620-3640-Ext)
0002000819006723(C25-AP4102)
0002010803508865(0002010803508865)
10210066235A0000(C25-AP3705)
This example shows AP added to the site1 site:
WLC.siemens.com
assign-policy
Use the
assign-policy
The
assign-policy
assign-policy (add|delete) policy-name
Parameters
add | delete
policy-name
SCALANCE WLC711 CLI Reference Guide
command to add or remove an AP from the site.
Specifies whether to add or delete the identified AP.
Specifies the AP to be assigned by its serial number.
:site:site1# assign-ap
:site:site1# assign-ap add 050000829F737045
command to assign (or remove) a policy to or from the site.
command is accessible from the site:<named-site> context.
Specifies whether to add or delete the policy.
Specifies the policy to be assigned to or removed from the site.
site Commands
assign-ap
395