Related Commands - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Parameters
None.
Examples
The following example displays information for the Ekahau location-based service:
WLC.siemens.com
LBS status: ekahau
LBS server address: 100.200.30.40
Ekahau server port: 6
Ekahau multicast address: 01:18:8e:00:00:00
Related commands
The following commands in other contexts relate to location-based service:
•
lbs-status
on page 380
•
show
on page 380
lbs-status
The
command allows you to enable or disable the collection of AeroScout/Ekahau tags on
lbs-status
a specific 802.11n AP or all 802.11n APs.
The
command is accessible from the following contexts:
lbs-status
•
ap:<serial> — Use the
AeroScout/Ekahau tags on a specific 802.11n AP. See
•
ap:defaults:11n — Use the
of AeroScout/Ekahau tags on all 802.11n APs. See
show
The
command allows you to display configuration information, including lbs-status, for a specific
show
802.11n AP or all 802.11n APs.
The
command is accessible from the following contexts:
show
•
ap:<serial> — Use the
specific 802.11n AP. See
•
ap:defaults:11n — Use the
802.11n APs. See
SCALANCE WLC711 CLI Reference Guide
:lbs# show
command in this context to enable or disable the collection of
lbs-status
command in this context to enable or disable the collection
lbs-status
command in this context to display configuration information for a
show
show
on page 116.
command in this context to display configuration information for all
show
show
on page 99.
Location-Based-Service (lbs) Commands
location
on page 150.
lbs-status
on page 109.
Related commands
380
Advertisement
Table of Contents
