Parameters
topology name
Example
The following example deletes the topology named test:
WLC.siemens.com
internal-vlanid
Use the internal-
vlanid
command is available from the topology context of the CLI.
internal-vlanid <1-4094>
Parameters
1-4094
Example
This following example sets the internal management VLAN ID of the topology:
WLC.siemens.com
multicast-support
Use the
multicast-support
multicast-support
multicast-support physical topology name | none
Parameters
physical topology
name
none
Example
This example enables multicast support on the phy1 topology:
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
Specifies the name of the topology to delete.
:topology# delete test
command to set an internal management VLAN ID. The internal-
The internal management VLAN ID.
:topology# internal-vlanid 2
command to configure multicast support for a physical topology. The
command is accessible from the topology context of the CLI.
Specifies the name of the physical topology to have multicast support.
Disables multicast-support.
:topology# multicast-support phy1
topology Commands
internal-vlanid
vlanid
342