Chapter 17: Users Commands - Siemens scalance WLC711 Reference Manual

17
users Commands
id
pwd
This section describes commands used to create and manage user accounts on the network. These
commands are found within the users context of the CLI.
All CLI commands cache changes. For this reason, sometimes when you make a change in a particular
context, the change may not be visible immediately. If this happens, you must exit and re-enter the
context in order to ensure that the database is synchronized with the latest change.
The following commands are available in the users context:
•
id on page 232
•
pwd on page 233
id
Use the command to create user or administrator accounts on the system. In conjunction with the
id
command, you must specify and confirm a password for the account. The password must be 8–24
id
alphanumeric characters long.
id userid admin|guestportal|readonly
Parameters
userid
admin
guestportal
readonly
Examples
The following example creates the read-only user account "abby" on the system:
WLC.siemens.com
Please input password:
Please confirm password:
Successfully created user abby.
SCALANCE WLC711 CLI Reference Guide
Specifies a name for the account
Sets account type to administrator
Sets account type to guestportal administrator. A guest administrator user created
using the guestportal user type can login to the system only via the GUI.
Sets account type to readonly
:users# id abby readonly
232