Siemens scalance WLC711 Reference Manual page 291

extsecret value_string | none
Parameters
value_string
none
Usage
The external authentication mode must be set for this command to be available. For more information,
see mode on page 302.
Example
The following example creates a Shared Secret password:
WLC.siemens.com
WLC.siemens.com
fqdn
Use the command, within context wlan:<WLAN-service-name>:auth:captiveportal, to replace the
fqdn
Gateway IP address with a Fully Qualified Domain Name (FQDN).
After you run the
fqdn
fqdn value_string | none
Parameters
value_string
none
Usage
The guestportal, internal, or splash authentication mode must be set for this command to be available.
For more information, see
Example
The following example replaces the Gateway IP address with a domain name:
WLC.siemens.com
WLC.siemens.com
guestportalacctlifetime
Use the
guestportalacctlifetime
name>:auth:captiveportal, to configure the lifetime for the guest portal access account, in days.
After you run the
guestportalacctlifetime
changes.
SCALANCE WLC711 CLI Reference Guide
Specifies a password
Specifies that no password is configured
:wlans:CNL-7-CP:auth:captiveportal# extsecret 5eCretH4nD5h4k3
:wlans:CNL-7-CP:auth:captiveportal# apply
command, run the
apply
Specifies a domain name
Specifies that the Gateway IP address is not replaced with a FQDN
mode on page 302.
:vnsmode:CNL-7-CP:auth:captiveportal# fqdn cp.siemens.com
:vnsmode:CNL-7-CP:auth:captiveportal# apply
command, within context wlan:<WLAN-service-
command to implement the changes.
command, run the
apply
wlans Commands
fqdn
command to implement the
291