Siemens scalance WLC711 Reference Manual page 244
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
show
Parameters
None.
Examples
The following example displays the default-role configuration from within the vnsmode:default-role
context:
WLC.siemens.com
Assigned topology: Bridged at AP untagged
Ingress rate profile: Unlimited
Egress rate profile: Unlimited
Enable AP filtering: enable
Synchronize: disable
WLC.siemens.com
sync
Use the
command to enable or disable automatic synchronization of the default-role across
sync
paired controllers. Refer to the Wireless User Guide for more information about synchronization of
policies.
The
command is accessible from within the vnsmode:default-role context.
sync
sync {enable | disable}
Parameters
enable | disable
Examples
The following example enables the synchronization of the default-role across controllers:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Assigned topology: Bridged at AP untagged
Ingress rate profile: Unlimited
Egress rate profile: Unlimited
Enable AP filtering: disable
Synchronize: enable
WLC.siemens.com
topology-name
Use the
topology-name
command is accessible from the vnsmode:default-role context.
topology-name
SCALANCE WLC711 CLI Reference Guide
:vnsmode:default-role#
:vnsmode:default-role#
Enables or disables synchronization of the default-role across controllers.
:vnsmode:default-role# sync enable
:vnsmode:default-role# apply
:vnsmode:default-role# show
:vnsmode:default-role#
command to associate an already existing topology with a role. The
VNS Commands (vnsmode)
show
sync
244
Advertisement
Table of Contents
