Upgrade_Backup - Siemens scalance WLC711 Reference Manual

user
password
dir
image name
Examples
If you want to delete the existing local upgrade schedule, add no before the local upgrade syntax as
shown in the following example:
WLC.siemens.com
The following example schedules a local upgrade:
WLC.siemens.com
MV-07.41.03.0003-1.rue
The following example schedules a remote upgrade:
WLC.siemens.com
192.168.4.10 test abc123 /ac/rpm/build07.41.03.0003 AC-MV-07.41.03.0003-1.rue
If you want to delete the existing remote upgrade schedule, add no before the remote upgrade syntax
as shown in the following example:
WLC.siemens.com

upgrade_backup

Use the
upgrade_backup
Appliance on the remote FTP server. Use the no form of the command to delete the remote rescue
backup.
The
upgrade_backup
upgrade_backup (local|flash|remote server user password dir file)
no upgrade_backup
Parameters
upgrade_backup
flash filename
SCALANCE WLC711 CLI Reference Guide
The user name to access the FTP server
The password to access the FTP server
The path to the directory where the new software is stored on the
FTP server
The new software's file name
:schedule_upgrade# no schld_upgrd
:schedule_upgrade# schld_upgrd 06:01:12:00 local AC-
:schedule_upgrade# schld_upgrd 06:01:12:00 remote
: schedule_upgrade# no schld_upgrd
command to create a rescue backup of the existing software of the Wireless
command is accessible from the schedule_upgrade context.
Specifies to backup the existing software of the Wireless Appliance
before initiating the upgrade process
Specifies that the backup image of the existing software of the
Wireless Appliance is to be saved on the flash card. This option is only
available if an external flash card has been mounted on the controller.
Backup file name can optionally be provided, but it must end with "-
rescue-user.tgz".
schedule_upgrade Commands
upgrade_backup
210