Siemens scalance WLC711 Reference Manual page 245

topology-name topology
Parameters
topology
Usage
Refer to VNS Commands (vnsmode)
Examples
The following example configures the default-role with the guestPortal topology:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Assigned topology: guestPortal
Ingress rate profile: Unlimited
Egress rate profile: Unlimited
Enable AP filtering: disable
Synchronize: enable
WLC.siemens.com
acfilters
Use the acfilters command to enter the vnsmode:default-role:acfilters context for the configuring of
default-role AC filters. The
context.
AC filter rules are applied at the controller. Default-role AC filter configuration is applied when no AC
filters are configured for role applied at the controller. AC filtering is not available when the associated
topology is configured for Bridge at AP. AC filtering is available when the associated topology is set to
either Bridge at AC or Routed.
The following commands are available in the vnsmode:default-role:acfilters context:
•
create on page 268
•
config on page 271
•
delete on page 273
•
move on page 273
apfilters
Use the
apfilters
AP custom filters. AP custom filters are applied at the AP. Default-role AP custom filters are applied
when no AP custom filters are configured for role applied at the AP. The
accessible from the vnsmode:default-role context.
This command is not visible in the CLI if you execute the
SCALANCE WLC711 CLI Reference Guide
Specifies the name of the topology to configure for this vnsmode:default-role
context.
on page 234 for information on configuring topologies.
:vnsmode:default-role# topology-name guestPortal
:vnsmode:default-role# apply
:vnsmode:default-role# show
:vnsmode:default-role#
command is accessible from within the vnsmode:default-role
acfilters
command to enter the vnsmode:default-role:apfilters context for the configuring of
VNS Commands (vnsmode)
apfilters
command.
apcustom disable
acfilters
command is
245