Starting System
Starter Replacement
1.
Make sure you have the anti-theft code for the radio,
then write down the frequencies for the radio's pre-
set buttons.
2.
Disconnect the battery negative terminal first, then
the positive terminal.
NOTE: The PCM memory setting is needed after
reconnecting the battery (see page 11-123).
3.
Raise the coolant reservoir, then remove the battery
and battery base.
4.
Remove the alternator belt and alternator (see page
4-29).
5.
Remove the left exhaust manifold cover. (see
section
9).
6.
Remove the left damper fork (see
7.
Disconnect the left suspension lower arm ball joint
(see
section
18).
8.
Remove the left driveshaft (see
section
18).
section
16).