Inserting The S8300 Media Server Module - Avaya G350 Installing And Upgrading

Table 1: Permitted slots for media modules (continued)
Media
module
MM342
MM710
MM711
MM712
MM714
MM716
MM717
MM720
MM722
S8300

Inserting the S8300 Media Server module

The S8300 can only be inserted in slot V1 on the left side of the G350 Media Gateway.
ELECTROSTATIC ALERT:
Hold media modules only by the edges to avoid damage from static electricity. Do
ELECTROSTATIC ALERT:
not touch the top or bottom of the circuit board. If possible, wear an anti-static
wrist-strap and use an anti-static bag.
!
CAUTION:
The connector pins can be bent or damaged if the module is handled roughly, or if
CAUTION:
misaligned and then forced into position.
Permitted slots
V2, V3, V4, V5
V1, V2, V3, V4, V5
V1, V2, V3, V4, V5
V1, V2, V3, V4, V5
V1, V2, V3, V4, V5
V1, V2, V3, V4, V5
V1, V2, V3, V4, V5
V1, V2, V3, V4, V5
V1, V2, V3, V4, V5
V1
Description
Provides one USP WAN port for connecting to a
WAN endpoint device.
Provides one E1/T1 trunk port for connecting an E1/
T1 telephone trunk.
Provides eight universal analog ports for connecting
analog telephones or trunks.
Provides eight ports for connecting DCP
telephones.
Provides four analog ports for analog telephones
and four analog ports for analog trunks.
Provides one amphenol connector that connects to
a punch down block to provide 24 analog line ports.
Provides one amphenol connector that connects to
a punch down block to provide 24 ports for
connecting DCP telephones.
Provides eight ports for connecting up to eight ISDN
trunks or 16 ISDN BRI stations.
Provides two ports for connecting ISDN trunks.
Media Server
Step 2: Install the media modules
Issue 4 February 2007
2 of 2
35