Check The Engine Belt - Deutz Diesel Models - Genie S-60 Service Manual

Third Edition • First Printing
C-1
Check the Engine Belt -
Deutz Diesel Models
Maintaining the engine belt is essential to good
engine performance and service life. The machine
will not operate properly with a loose or defective
belt and continued use may cause component
damage.
Bodily injury hazard. Do not
inspect while the engine is
running. Remove the key to
secure from operation.
Bodily injury hazard. Beware of
hot engine components. Contact
with hot engine components may
cause severe burns.
1 Remove the 2 engine pivot plate retaining bolts.
Swing the engine pivot plate away from the
machine to access the engine belt.
a
b
a engine pivot plate
b pivot plate retaining bolts
c air baffle
Part No. 65196
Table C Procedures
2 Remove the front engine access cover mounting
3 Inspect the engine belt for:
4 Replace belt if any damage is found.
5 Check the engine belt for proper tension. Adjust
6 Install the front engine access cover.
7 Swing the engine pivot plate back to its original
Belt deflection -
Deutz Diesel models
Engine belt - Genie part number
c
b
Genie S-60 & Genie S-65
Section 4 • Scheduled Maintenance Procedures
fasteners.
· Cracking
· Glazing
· Separation
· Breaks
as necessary.
Deutz Diesel engine
position and install the two engine pivot plate
retaining bolts.
3 1
/ inch to / inch
8 2
9 mm to 12 mm
32698
4 - 53