Genie S-60 Service Manual page 123

Third Edition • First Printing
Continued from the
previous page.
Part No. 65196
no
Crank engine for 15
continuity
seconds and check for
continuity to ground at
terminal #86 on CR3.
continuity
no
Crank engine for 15
continuity
seconds and check for
continuity to ground at
terminal #30 on CR3.
continuity
0 or
infinite
ohms
Check resistance of
LPG solenoid.
9 to 10 ohms
Reconnect LPG tank
and starter then see
Maintenance section for
LPG adjustments OR
consult Genie Industries
Service Department.
Genie S-60 & Genie S-65
Section 5 • Troubleshooting Flow Charts
Repair open in dk grn
wire from ECM to
terminal #86 on CR3 OR
replace ECM.
Replace LPG relay CR3.
Replace LPG solenoid.
CHART 4
5 - 17