Confirm The Proper Brake Configuration - Genie S-60 Service Manual

Third Edition • First Printing
B-4
Confirm the Proper
Brake Configuration
Proper brake configuration is essential to safe
operation and good machine performance.
Hydrostatic brakes and hydraulically-released,
spring-applied individual wheel brakes can appear
to operate normally when they are actually not fully
operational.
1 Check each drive hub disconnect cap to be
sure it is in the engaged position.
Part No. 65196
brake disengage position
brake engage position
Genie S-60 & Genie S-65
Section 4 • Scheduled Maintenance Procedures
TABLE B PROCEDURES
2 Be sure the free-wheel valve is
closed (clockwise).
The free-wheel valve is located on
the drive pump.
a
a drive pump
b free-wheel valve
c lift pump
d screwdriver
The free-wheel valve should
always remain closed.
d
c
b
4 - 33