Check For Hydraulic Leaks; Check The Tire Pressure - Genie S-60 Service Manual

Section 4 • Scheduled Maintenance Procedures
TABLE A PROCEDURES
A-8

Check for Hydraulic Leaks

Detecting hydraulic fluid leaks is essential to
operational safety and good machine performance.
Undiscovered leaks can develop into hazardous
situations, impair machine functions and damage
machine components.
Bodily injury hazard. Spraying
hydraulic oil can penetrate and
burn skin.
1 Inspect for hydraulic oil puddles, dripping or
residue on or around the following areas:
· Hydraulic tank—filter, fittings, hoses, auxiliary
power unit, filters, and turntable surface
· Engine compartment—hydraulic filters,
fittings, hoses, pumps, component tray
· All hydraulic cylinders
· All hydraulic manifolds
· Primary, and jib booms
· The underside of the turntable
· The underside of the drive chassis
· Ground area under the machine
4 - 10
A-9

Check the Tire Pressure

To safeguard maximum stability, achieve
optimum machine handling and minimize tire
wear, it is essential to maintain proper pressure
in all air-filled tires.
1 Check each tire with an air pressure gauge.
Add air as needed.
Tire specifications
Tire size
Pressure
Genie S-60 & Genie S-65
Third Edition • First Printing
Bodily injury hazard. An over-
inflated tire can explode and could
cause death or serious injury.
Tip-over hazard. Do not use
temporary flat tire repair products.
This procedure does not need
to be performed on machines
equipped with the foam-filled
tire option.
Part No. 65196
15-19.5 NHS
85 psi
5.86 bar