Perform Hydraulic Oil Analysis; Replace The Hydraulic Tank Return Filter - Genie S-60 Service Manual

Section 4 • Scheduled Maintenance Procedures
TABLE B PROCEDURES
B-21

Perform Hydraulic Oil Analysis

See E-1, Test or Replace the Hydraulic Oil.
4 - 48
B-22
Replace the Hydraulic Tank
Return Filter
Replacement of the hydraulic tank return filter is
essential for good machine performance and
service life. A dirty or clogged filter may cause the
machine to perform poorly and continued use may
cause component damage. Extremely dirty
conditions may require that the filter be replaced
more often.
1 Place a suitable container under the hydraulic
tank return filter.
2 Remove the filter with an oil filter wrench.
3 Apply a thin layer of fresh oil to the new oil filter
gasket.
Genie S-60 & Genie S-65
Third Edition • First Printing
Genie requires that this procedure
be performed quarterly or every
250 hours, whichever comes first.
Perform this procedure more often
if dusty conditions exist.
Bodily injury hazard. Beware of
hot oil. Contact with hot oil may
cause severe burns.
Perform this procedure with the
engine off.
Part No. 65196