Check The Engine Belt - Gasoline/Lpg And Perkins Diesel Models - Genie S-60 Service Manual

Section 4 • Scheduled Maintenance Procedures
TABLE A PROCEDURES
Cooling and Fan Blower Fins
4 Remove the 2 bolts from under the engine pivot
plate. Swing the engine pivot plate away from
the machine to access the fan blower.
a
b
a engine pivot plate
b pivot plate retaining bolts
c air baffle
5 Inspect the fan blower fins for physical damage.
6 Clean the fan blower fins of debris and foreign
material.
7 Inspect the head cooling passages and fins for
physical damage or foreign material, using a
flashlight.
8 Clean the cylinder head cooling passages and
fins of debris and foreign material.
9 Install the engine side cover.
10 Swing the engine pivot plate back to its original
position and install the two engine pivot plate
retaining bolts.
4 - 26
A-23
Check the Engine Belt -
Gasoline/LPG and Perkins Diesel
Models
Maintaining the engine belt is essential to good
engine performance and service life. The machine
will not operate properly with a loose or defective
c
b
belt and continued use may cause component
damage.
Genie S-60 & Genie S-65
Third Edition • First Printing
Engine specifications require that
this procedure be performed every
200 hours.
Bodily injury hazard. Do not
inspect while the engine is
running. Remove the key to
secure from operation.
Bodily injury hazard. Beware of
hot engine components. Contact
with hot engine components may
cause severe burns.
Part No. 65196