Checklist A Procedures - Rev A; Perform Pre-Operation Inspection; Perform Engine Maintenance - Deutz Models - Genie Z-60/34 Service Manual

November 2003
REV A
A-1
Perform Pre-operation
Inspection
Completing a pre-operation inspection is essential
to safe machine operation. The pre-operation
inspection is a visual inspection performed by the
operator prior to each work shift. The inspection is
designed to discover if anything is apparently wrong
with a machine before the operator performs the
function tests. The pre-operation inspection also
serves to determine if routine maintenance
procedures are required.
Complete information to perform this procedure is
available in the Genie Z-60/34 Operator's Manual
on your machine.
Part No. 75861
Section 3 • Scheduled Maintenance Procedures
Checklist A Procedures
A-2
Perform Engine Maintenance -
Deutz Models
Proper engine maintenance, following the engine
manufacturer's maintenance schedule, is essential
to good engine performance and service life. Failure
to perform the maintenance procedures can lead to
poor engine performance and component damage.
Required maintenance procedures and additional
engine information are available in the
Deutz FL 1011F Operation Manual
(Deutz part number 0297 9683).
Deutz FL 1011F Operation Manual
Genie part number
To access the engine:
1 Remove the two engine pivot plate retaining
bolts. Swing the engine pivot plate out away
from the machine and secure it from moving.
Genie Z-60/34
Engine specifications require that
this procedure be performed daily
or every 10 hours, whichever
comes first.
Crushing hazard. Failure to secure
the engine pivot plate from moving
could result in death or serious
injury.
52883
3 - 7