Check The Engine Coolant Level - Liquid Cooled Models; Check For Fuel Leaks - Genie S-60 Service Manual

Section 4 • Scheduled Maintenance Procedures
TABLE A PROCEDURES
A-5
Check the Engine Coolant Level -
Liquid Cooled Models
Maintaining the engine coolant at the proper level
is essential to engine service life. Improper coolant
level will affect the engine's cooling capability and
damage engine components. Daily checks will
allow the inspector to identify changes in coolant
level that might indicate cooling system problems.
Burn hazard. Beware of hot
engine parts and coolant. Contact
with hot engine parts and/or
coolant may cause severe burns.
1 Check the fluid level in the coolant recovery
tank. Add fluid as needed.
Result: The fluid level should be at the
mark.
FULL
Do not remove the radiator cap.
4 - 8
A-6

Check for Fuel Leaks

Failure to detect and correct fuel leaks will result in
an unsafe condition. An explosion or fuel fire may
cause death or serious injury.
1 Open the shutoff valve on the liquid petroleum
gas (LPG) tank by turning it counterclockwise
(if equipped).
Genie S-60 & Genie S-65
Third Edition • First Printing
Explosion and fire hazard. Engine
fuels are combustible. Inspect the
machine in an open, well-
ventilated area away from heaters,
sparks, flames and lighted
tobacco. Always have an
approved fire extinguisher within
easy reach.
Part No. 65196