Replace The Pcv Valve - Gasoline/Lpg Models - Genie S-60 Service Manual

Section 4 • Scheduled Maintenance Procedures
TABLE C PROCEDURES
C-8
Replace the PCV Valve -
Gasoline/LPG Models
Engine specifications require
that this procedure be performed
every 800 hours.
Yearly replacement of the PCV valve is essential to
good engine performance. A malfunctioning PCV
valve can restrict crankcase ventilation and may
cause engine damage.
Perform this procedure with the
engine off.
1 Open the engine side turntable cover.
2 Remove the 2 engine pivot plate retaining bolts
and swing the engine out away from the
machine to access the PCV valve.
a
b
a engine pivot plate
b pivot plate retaining bolts
c air baffle
4 - 60
3 Locate the PCV valve on the engine under the
4 Remove the PCV valve from the canister.
5 Thoroughly clean the inside and outside of the
6 Install the new PCV valve and connect the
7 Swing the engine pivot plate back to its original
PCV Valve - Genie part number
c
b
Genie S-60 & Genie S-65
Third Edition • First Printing
intake manifold. Remove the hose from the
PCV valve.
a PCV valve hose
b PCV valve
Discard the valve.
hose, tubes and fittings
hose.
position and install the two engine pivot plate
retaining bolts.
33957
Part No. 65196