Check The Hydraulic Oil Level - Genie S-60 Service Manual

Third Edition • First Printing
2 Perform a visual inspection around the following
areas.
Gasoline/LPG models:
· LPG tank, hoses and fittings, solenoid shutoff
valve, LPG regulator and throttle body.
An LPG detector may be
necessary to locate LPG leaks.
· Gasoline tank, manual shutoff valve, fuel
pump, fuel filters, fuel rail and fuel injectors,
hoses and fittings and throttle body.
Diesel models:
· Fuel tank, shutoff valve, hoses and fittings,
fuel pump, fuel filter, fuel injection pumps and
fuel injectors (atomizers).
Explosion and fire hazard. If a fuel
leak is discovered, keep any
additional personnel from entering
the area and do not operate the
machine. Repair the leak
immediately.
Part No. 65196
Section 4 • Scheduled Maintenance Procedures
A-7

Check the Hydraulic Oil Level

Maintaining the hydraulic oil at the proper level is
essential to machine operation. Improper hydraulic
oil levels can damage hydraulic components. Daily
checks allow the inspector to identify changes in oil
level that might indicate the presence of hydraulic
system problems.
1 Be sure that the boom is in the stowed position,
then visually inspect the sight gauge located on
the side of the hydraulic oil tank.
Result: The hydraulic oil level should be within
the top 2 inches (5 cm) of the sight gauge.
2 Add oil as needed.
Hydraulic oil specifications
Hydraulic oil type
Tank capacity
Hydraulic system
(including tank)
Genie S-60 & Genie S-65
TABLE A PROCEDURES
Dexron equivalent
45 gallons
170 liters
53 gallons
200.6 liters
4 - 9