Oscillate Manifold Components - Genie S-60 Service Manual

Third Edition • First Printing
11-4

Oscillate Manifold Components

The oscillate manifold is mounted inside the drive chassis at the non-steer end.
Index
No. Description
1 Orifice Plug, 0.052 inch (1.32 mm) .... KK ......... Differential sensing circuit
2 Differential sensing valve .................. LL ......... Differential sensing ........................... 10-12 ft-lbs (14-16 Nm)
3 Check valve ....................................... MM ....... Oscillate check - left .......................... 35-40 ft-lbs (47-54 Nm)
4 Pilot operated unloader valve
950 psi (65 bar) ................................. NN ........ Sequencing ....................................... 10-12 ft-lbs (14-16 Nm)
5 Shuttle valve, 2 position 3 way .......... OO ........ Pilot ................................................... 10-12 ft-lbs (14-16 Nm)
6 Piston ................................................................ Check valve circuit
7 Check valve ....................................... PP ......... Oscillate check - right ....................... 35-40 ft-lbs (47-54 Nm)
8 Shuttle valve, 2 position 3 way .......... QQ ........ Unloading .......................................... 35-40 ft-lbs (47-54 Nm)
9 Diagnostic fitting ............................................... Testing
9
QQ
8
7
PP
6
Part No. 65196
Schematic
Item Function
(the piston is located between
index numbers 3 and 7)
1 2
KK
LL
MM
OO
Plug Torque Specifications
5
Description
SAE No. 2
SAE No. 4
SAE No. 6
Genie S-60 & Genie S-65
Section 7 • Repair Procedures
3
NN
4
Hex size
1
/
8
3
/
16
1
/
4
MANIFOLDS
Torque
Torque
50 in-lbs (6 Nm)
13 ft-lbs (18 Nm)
18 ft-lbs (24 Nm)
7 - 51