2Wd Drive Manifold Components - Genie S-60 Service Manual

Third Edition • First Printing
11-9

2WD Drive Manifold Components

The drive manifold is mounted inside the drive chassis at the non-steer end.
Index
No. Description
1 Relief valve, 250 psi (17.2 bar) ......... WW ....... Charge pressure circuit ..................... 10-12 ft-lbs (14-16 Nm)
2 Flow divider/combiner valve .............. XX ......... Controls flow to drive motors
3 Orifice, 0.070 inch (1.78 mm) ............ YY ......... Drive circuit
4 Shuttle valve, 3 position 3 way .......... ZZ ......... Charge pressure circuit that
5 Diagnostic fitting ............................................... Testing
Plug Torque Specifications
Description Hex size
3
SAE No. 4 /
1
SAE No. 6 /
5
SAE No. 8 /
Part No. 65196
Schematic
Item
Torque
13 ft-lbs (18 Nm)
16
18 ft-lbs (24 Nm)
4
50 ft-lbs (68 Nm)
16
Genie S-60 & Genie S-65
Function
in forward and reverse ...................... 25-30 ft-lbs (34-41 Nm)
gets hot oil out of low pressure
side of drive pump and allows
low pressure flow path for
brake release and 2-speed
motor shift ......................................... 15-18 ft-lbs (20-24 Nm)
Section 7 • Repair Procedures
MANIFOLDS
Torque
7 - 57