Inspect The Tires And Wheels (Including Lug Nut Torque) - Genie S-60 Service Manual

Section 4 • Scheduled Maintenance Procedures
TABLE B PROCEDURES
B-3
Inspect the Tires and Wheels
(including lug nut torque)
Maintaining the tires and wheels in good
condition is essential to safe operation and good
performance. Tire and/or wheel failure could result
in a machine tip-over. Component damage may
also result if problems are not discovered and
repaired in a timely fashion.
Bodily injury hazard. An over-
inflated tire can explode and could
result in death or serious injury.
Tip-over hazard. Do not use
temporary flat tire repair products.
The tires on some machines are
foam filled and do not need air
added to them.
1 Check all tire treads and sidewalls for cuts,
cracks, punctures and unusual wear.
2 Check each wheel for damage, bends and
cracked welds.
3 Check each lug nut for proper torque.
4 - 32
4 Check the pressure in each air-filled tire. Add
air as necessary.
Tires and wheels
Tire size
Pressure
Tire ply rating
Wheel lugs
Lug nut torque, dry
Lug nut torque, lubricated
Genie S-60 & Genie S-65
Third Edition • First Printing
15-19.5 NHS
85 psi
5.86 bar
3
10 @ /
420 ft-lbs
569.5 Nm
320 ft-lbs
433.9 Nm
Part No. 65196
12
-16
4