Ford 2003 Mustang Workshop Manual page 610

Hide thumbs Also See for 2003 Mustang:

Table of Contents

SECTION 206-05: Parking Brake and Actuation

REMOVAL AND INSTALLATION

Cable and Conduit

NOTE: The RH rear is shown, the LH is similar.

CAUTION: If any component in the parking brake system requires repair or if the

rear axle housing (4010) is removed, the cable tension must be released.

Release the cable tension. For additional information, refer to

in this section.

2. Disconnect the parking brake rear cable and conduit.

3. Using a 13 mm (0.52 in) box-end wrench, depress the conduit retaining prongs and remove the

parking brake rear cable and conduit.

2003 Mustang Workshop Manual

Parking Brake Cable Tension

Show Quick Links

Table of Contents