Ford 2003 Mustang Workshop Manual page 671

SECTION 206-09A: Anti-Lock Control — Rear
REMOVAL AND INSTALLATION
Sensor —Front
Removal
1. Remove the wheel and tire assembly. For additional information, refer to
2. Remove the inner fender splash shield.
1. Remove the inner fender splash shield push pins.
2. Remove the inner fender splash shield screw.
3. Remove the inner fender splash shield.
3. Remove the front anti-lock brake sensor electrical connector.
4. Remove the front anti-lock brake sensor harness from the anti-lock brake sensor harness clips.
5. Remove the front anti-lock brake sensor.
1. Remove the front anti-lock brake sensor bolt.
2. Remove the anti-lock brake sensor harness from the harness clips.
3. Remove the front anti-lock brake sensor.
2003 Mustang Workshop Manual
Section 204-04 .