4. Install the right hand A/C register duct.
Connect the A/C duct at the air plenum.
Install the duct at the A/C register and install the two screws.
5. Close the glove compartment.
6. Remove the restraint system diagnostic tool from the clockspring electrical connector.
7. Connect the clockspring electrical connector at the base of the steering column.
8. Install the steering column opening lower reinforcement.
1. Position the steering column opening lower reinforcement.
2. Install the bolts.
9. Install the steering column opening lower finish panel.
1. Align the steering column opening lower finish panel and push in, seating the retaining
clips.
2. Install the screws.