Ford 2003 Mustang Workshop Manual page 141

SECTION 204-00: Suspension System — General Information
GENERAL PROCEDURES
Camber and Caster Adjustment —Front
All vehicles
1. Remove the rivet. Loosen the nuts and bolt.
Vehicles requiring camber adjustment
2. Move the front suspension camber adjusting plate (3B391) to the required camber setting.
Vehicles requiring caster adjustment
3. NOTE: If caster adjustment is necessary to resolve a pull, or out of specification cross-caster
split, then slotting the shock tower at the front shock absorber (18124) upper mounting point is
an acceptable method. This procedure should not be routinely performed with all alignments
and only after all other possible sources have been inspected and corrected as necessary.
Determine the amount of caster adjustment needed.
If no more than 0.6 degree is needed, only one shock tower needs to be slotted.
4. Mark the camber position of the front suspension camber adjusting plate (3B391).
2003 Mustang Workshop Manual