Ford 2003 Mustang Workshop Manual page 507

SECTION 205-05: Rear Drive Halfshafts
DISASSEMBLY AND ASSEMBLY
Halfshaft Joint
Special Tool(s)
Driver
205-199 (T83T-3132-A1)
Hub Bearing Cup Replacer
205-147 (T80T-4000-P)
Sensing Ring Replacer
206-041 (T89P-20202-A)
Disassembly
1. CAUTION: Do not disassemble the halfshaft assembly. Install a new assembly if
worn or damaged.
Remove the halfshaft from the vehicle. For additional information, refer to
section.
2. If necessary, remove the dust seal assembly (2217).
1. Tap uniformly around the dust seal assembly.
2. Slide the dust seal assembly from the shaft.
3. Using a suitable bearing plate and a press, remove the rear brake anti-lock sensor indicator, if
necessary.
2003 Mustang Workshop Manual
Halfshaft in this