Ford 2003 Mustang Workshop Manual page 968

SECTION 303-01A: Engine — 3.8L
IN-VEHICLE REPAIR
Valve Cover —LH
Removal and Installation
1. Position the ignition wires (12281) aside.
2. Disconnect the positive crankcase ventilation (PCV) valve (6758).
3. Remove the ignition coil and position aside.
1. Disconnect the electrical connector.
2. Disconnect the accelerator control cable retainer.
3. Remove the bolts.
4. Remove the LH valve cover (6A565).
Inspect the gasket (6584) and install a new gasket if necessary.
2003 Mustang Workshop Manual