Ford 2003 Mustang Workshop Manual page 482

Hide thumbs Also See for 2003 Mustang:

Table of Contents

31. NOTE: If a new bolt is unavailable, coat the original bolt threads with Threadlock and Sealer

EOAZ-19554-AA or equivalent meeting Ford specification WSK-M2G351-A5 prior to final

installation.

Install the differential pinion shaft and install a new bolt finger-tight.

32. Mount the differential case and the special tool in a vise. Using the special tool, check the

torque necessary to rotate one differential side gear.

If reusing the original clutch plates, the initial minimum break-away torque must be no

less than the specification. The minimum rotating torque necessary to keep the

differential side gear turning with new clutch plates may vary.

CAUTION: The Master bearings are marked LH and RH. Install them as shown.

Install the special tools on the differential case.

Show Quick Links

Table of Contents