Ford 2003 Mustang Workshop Manual page 263

SECTION 205-00: Driveline System — General Information
SPECIFICATIONS
Driveline Angles @ Curb Specifications
Engine (L) Engine Angle (Deg) Driveshaft Angle (Deg) Pinion Angle (Deg)
3.8
4.6 (2V)
All driveshaft and pinion angles point downward.
General Specifications
Item
Axle Capacities and Lubricant Specifications
a
7.5 inch rear axle
a
(base and GT vehicles) 1.9 liters (4.0/3.75 pints)
8.8 inch rear axle
b
Traction-Lok
Premium Rear Axle Lubricant
XY-80 W90-QL
Additive Friction Modifier
C8AZ-19B546-A
Premium Long-Life Grease
XG-1-C
a
Service refill capacities are determined by filling the axle 6.3 mm (0.25 in [1/4 in]) to 14.3 mm (0.57 in
[5/16 in]) below the bottom of the filler hole. The vehicle must be on a level surface.
b
Friction Modifier
4.0
4.0
2.95
3.61
Specification
1.5 liters (3.5 pints)
118 ml (4 oz)
WSP-M2C197-A
EST-M2C118-A
ESA-M1C75-B
2003 Mustang Workshop Manual
0.55
0.55