SECTION 205-02A: Rear Drive Axle/Differential — Ford 7.5-Inch Ring
Gear
IN-VEHICLE REPAIR
Differential Case
Special Tool(s)
2-Jaw Puller
205-D072 (D97L-4221-A) or
equivalent
Dial Indicator Gauge with
Holding Fixture
100-002 (TOOL-4201-C) or
equivalent
Gauge, Clutch Housing
308-021 (T75L-4201-A) or
equivalent
Installer, Differential Shim
205-220 (T85L-4067-AH)
Installer, Differential Side
Bearing
205-009 (T57L-4221-A1)
Step Plate
205-D016 (D80L-630-5) or
equivalent
Removal
1. Remove the differential housing cover (4033) and drain the rear axle (4001). For additional
information, refer to
2.
CAUTION: Reinstall the differential pinion shaft (4211) and the bolt in the differential
case (4204) after removing the axle shafts (4234).
Differential Housing Cover
2003 Mustang Workshop
in this section.
Manual