Ford 2003 Mustang Workshop Manual page 137

Vehicle leans to
one side
Vibration/noise
Wander
Strut(s).
Shock absorber(s).
Loose front
stabilizer bar (5482)
or rear stabilizer
bar (5A772).
Worn stabilizer
assembly bushing
(s).
Front coil spring(s)
or rear spring(s).
Unevenly loaded or
overloaded vehicle.
Front or rear
suspension
components.
Front coil springs or
rear springs.
Incorrect ride
height. Lateral tilt
out of specification.
Tire or wheel
runout.
Tire flatspotting.
Wheel bearings.
Wheel hubs.
Brake components.
Suspension
components.
Steering
components.
Unevenly loaded or
overloaded vehicle.
Ball joint(s).
Front wheel bearing
(s).
Loose, worn or
damaged
suspension
components(s).
Loose suspension
fasteners.
REFER to Section 204-04
INSTALL new strut(s) as
necessary. REFER to Section
204-01 .
INSTALL new shock absorber
(s) as necessary.
TIGHTEN to specification.
REFER to Section 204-01
Section 204-02 .
INSTALL new bushing(s) as
necessary. REFER to Section
204-01 or Section 204-02
INSTALL new front coil
springs or rear springs as
necessary. REFER to Section
204-01 or Section 204-02
NOTIFY the customer of
incorrect vehicle loading.
INSPECT the front and rear
suspension system. REPAIR
or INSTALL new suspension
components as necessary.
REFER to Section 204-01
Section 204-02 .
INSTALL new front coil
springs or rear springs as
necessary. REFER to Section
204-01 or Section 204-02
CHECK ride height. INSTALL
new front coil springs or rear
springs as necessary. REFER
to Section 204-01 or Section
204-02 .
REFER to Section 100-04
NOTIFY the customer of
incorrect vehicle loading.
GO to the Ball Joint Inspection
component test in this section.
REFER to Wheel Bearing
Inspection in this section.
INSTALL new suspension
components as necessary.
REFER to Section 204-01
Section 204-02 .
TIGHTEN to specification.
REFER to Section 204-01
Section 204-02 .
.
or
.
.
or
.
.
or
or