Ford 2003 Mustang Workshop Manual page 378

Hide thumbs Also See for 2003 Mustang:

Table of Contents

3. NOTE: If possible, allow one hour before filling the axle with lubricant to make sure the silicone

sealant has cured.

Install the differential housing cover.

1. Install the differential housing cover.

2. Install the 10 bolts.

4. NOTE: If it is necessary to refill a Traction-Lok® axle with new lubricant, add 118 ml (4 oz) of

Additive Friction Modifier C8AZ-19B546-A or equivalent meeting Ford specification EST-

M2C118-A before filling the axle with the new lubricant.

NOTE: In-vehicle repair refill capacities are determined by filling the rear axle with the specified

lubricant to 6.4-14.3-mm (1/4-9/16-in) below the bottom of the fill hole.

Fill the rear axle to the level shown, approximately 1.66-1.77-liters (3.5-3.75-pints) of lubricant,

and install the filler plug.

Use SAE 75W-140 High Performance Rear Axle Lubricant F1TZ-19580-B or equivalent

meeting Ford specification WSL-M2C192-A.

5. Lower the vehicle.

Show Quick Links

Table of Contents