2. Install new bolts and nuts. Do not tighten the nuts at this time.
2. Connect the upper suspension arm and bushing to the knuckle.
1. Position the arm and bushing.
2. Install a new cam bolt and a new nut. Do not tighten the nut at this time.
3. Raise the subframe into position and install new front bolts.
4. Install the springs. For additional information, refer to
5. Position a jack stand under the lower suspension arm and bushing.
6. Raise the suspension until the shock absorber is compressed to the alignment mark (curb
height).
Spring—Cobra
in this section.