Ford 2003 Mustang Workshop Manual page 234

SECTION 204-02: Rear Suspension
REMOVAL AND INSTALLATION
Spring —Cobra
Special Tool(s)
Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital
components and systems and their failure can result in major service expense. A new part with
the same part number must be installed if installation becomes necessary. If substitution is
necessary, the part must be of the same finish and property class. Torque values must be used
as specified during reassembly to make sure of correct retention of these parts.
1. Raise the vehicle on a hoist. For additional information, refer to
2. Support the No. 1 crossmember with a jack stand.
3. Remove both wheel and tire assemblies. For additional information, refer to
4. Remove both mufflers. For additional information, refer to
5. Remove the driveshaft. For additional information, refer to
6. Disconnect the parking brake cable and conduits from the parking brake levers.
7. Remove the clip and disconnect the parking brake cable and conduits from the rear brake
calipers.
Rotunda Powertrain Lift
014-00765 or Equivalent
2003 Mustang Workshop Manual
Section 100-02 .
Section 204-04
Section 309-00 .
Section 205-01 .
.