Wheel And Tire - Ford 2003 Mustang Workshop Manual

SECTION 204-04: Wheels and Tires
REMOVAL AND INSTALLATION

Wheel And Tire

Removal
1. CAUTION: Do not use heat to loosen a seized wheel nut (1012). Heat can damage
the wheel and wheel bearings.
NOTE: To avoid damage or scratching to the center cap, place facing up when removed.
Loosen the wheel nuts.
1. NOTE: To avoid wheel damage, do not twist wrench when removing center cap.
Remove the center cap, if equipped.
2. Loosen, but do not remove, the wheel nuts.
2. CAUTION: Never use the differential housing as a lifting point.
Raise the vehicle until the tire clears the ground. For additional information, refer to
100-02 .
3. CAUTION: Do not use heat to loosen a seized wheel because heat can shorten the
life of the wheel and damage the wheel bearings. If the wheel cannot be removed by
hand, use a wheel puller to remove the seized wheel.
Remove the wheel and tire assembly.
Remove the wheel nuts.
Remove the wheel and tire.
2003 Mustang Workshop Manual
Section