Ford 2003 Mustang Workshop Manual page 505

10. Connect the shock absorber to the suspension lower arm and bushing and install the new bolt
and a new nut.
11. Tighten the nut.
12. Lower the suspension and remove the jack stand.
13. Apply Anti-Seize Lubricant to the rear brake anti-lock sensor where it contacts the axle housing
and install the anti-lock sensor.
Use High Temperature Nickel Anti-Seize Lubricant F6AZ-9L494-AA or equivalent
meeting Ford specification ESE-M124A-A.
14. Install the rear brake disc. For additional information, refer to
15. Tighten the retainer.
Section 206-04 .