Ford 2003 Mustang Workshop Manual page 666

Hide thumbs Also See for 2003 Mustang:

Table of Contents

SECTION 206-09A: Anti-Lock Control — Rear

REMOVAL AND INSTALLATION

Hydraulic Control Unit

1. Disconnect the battery ground cable(14301).

2. Disconnect the anti-lock-brake control module electrical connector.

3. NOTE: The 4 wheel anti-lock brake system (4WABS) with traction control is shown , the

4WABS without traction control system is similar with one less hydraulic line.

NOTE: Plug brake lines to prevent any brake fluid loss.

Disconnect the brake lines from the hydraulic control unit (HCU).

4. Remove the HCU bracket nuts to HCU.

5. Remove the HCU.

2003 Mustang Workshop Manual

Show Quick Links

Table of Contents